;

Fusion Mineral Paint – Pouring Resin

Fusion Mineral Paint – Pouring Resin

£23.99

3 in stock

Fusion Mineral Paint Pouring Resin is an acrylic pouring medium for creating beautiful art on canvas or wood, and dries with a glossy finish.

Available in 500ML

3 in stock

Description

Fusion Mineral Paint Pouring Resin is an acrylic pouring medium for creating beautiful art on canvas or wood and dries with a glossy finish.

This Pouring Resin mixes seamlessly with Fusion to create beautiful and unique acrylic pour artwork.  It can be used on canvas, furniture, or any surface that Fusion sticks to.  It finishes to a very durable, glossy finish, and can even be used on its own as a finish or top coat over Fusion Mineral Paint.  It can even be painted on top of for a multi-dimensional look.

  • Durable glossy finish

  • Easy to Use

  • No topcoat needed

  • Non-toxic

  • No VOCs

HOW TO USE

Stir Pouring Resin before using.  Best used on a horizontal surface for best application, as Pouring Resin is self-levelling.

To add colour, add a couple of drops of any Fusion Mineral Paint to tint the Resin (no more than 10% paint ratio).  You want to use very little paint so that the products flows.

Tap the surface to settle air any bubbles.

If using Cell Enhancer, afterwards be sure to wipe those areas clean with a bit of rubbing alcohol to remove the shiny wet look.

Dry time: 8-12 hours
Re-coat time: 12-24 hours
Cure time: 21 days

TOP TIP:
Using in a mould: Pouring resin can be used in a shallow mould. However, it is possible to add layers of resin in deeper moulds. Only do this once the first layer has had time to dry. You must allow time for the water to evaporate, which may causing shrinking.

TOP TIP:
Minimising bubbles: You can use heat to help reduce bubbles, although it is imperative to do this with care. You do not want to burn the resin. To prevent unwanted bubbles in the first place, don’t pour from too far above (which can cause bubbles to form as the resin hits the substrate), gentle mixing of colours into the Pouring Resin and then waiting for a couple hours before pouring to allow for bubbles to dissipate.

TOP TIP:
Spreading the the Pouring Resin:  Is intended to be poured, brushing it on can create brush strokes and is not recommended. If you want to move the resin around, it is best to tilt the piece, but you can also use tools like a palette knife.

SIZE: 500ml

Feeling Inspired?
It’s no surprise that Fusion™ has a global fan base – we all inspire each other with our use of Fusion™ paints and auxiliary products. To join in, follow the Paint It Beautiful Facebook page where you’ll find a wealth of hints, tips and inspiration.

Why not try some paint from the following brands?

 

Bring your own unique style to any piece by adding any of the following

Decorative Mouldings – WoodUbend
Onlays – PolyOnlay
Metallic Pigments & Pastes – Posh Chalk UK

 

Want to add some depth and dimension to take your project to the next level? Why not try our range of accenting and finishing products from Dixie Belle:

Accenting – Dixie Mud & Spatula, Dixie Dirt, Sea Spray
Finishing – Clear Coat, Gator Hide & Applicator Sponge, Hemp Oil
Gel Stains – Voodoo Gel Stain, No Pain Gel Stain
Glazes – Glazes
Metallics – Moonshine Metallics
Waxes – Best Dang Wax, Gilding Wax, Big Mama’s Butta & Easy Peasy Wax
Patina – Patina Collection